MOB MO9075 Manual Del Usuario página 2

MO9075
EN
Power Bank with Solar Panel
Charging electronic digital equipment:
Please use the original cable of your electronic digital products for
connection. The power bank will automatically charge up your
electronic digital products once they are connected to each other.
Unplug the charging cable after the digital product is fully charged.
Caution:
The output power of the power bank is 5V/1A, please check the
specification of your product before charging with the power bank.
Check battery capacity in power bank:
Press the button to check if the power bank needs to be recharge.
The Blue LED lights indicate battery capacity reminded in power
bank as follows – 4 lights = 100%; 3 lights = 75%; 2 lights = 50%; 1
light = 25%
Charging power bank
Place the solar panel directly toward the sun for recharge; or
Connect the power bank with a DC USB port. Plug the micro USB
cable to the power bank for charging. The blue indicator light will
flash when charging in progress. The blue indicator lights all turns
into static when the power bank is fully charged.
When connecting the power bank to the device, please use
transmission lines and connectors provided from the authorized
maker. The use of transmission lines or connectors from
unauthorized maker may cause severe or fatal injuries and property
losses, and damage to the product and the device.
Power Bank is compatible with Apple® Product USB Cable/ adapter
(Not Included).
If the product does not start charging when it connects to the device,
please try to disconnect all cable and try again.

Battery explode if disposed in fire

Dry location use only

Shock hazard – Do not disassemble

Do not overheat batteries by exposure under high
temperature