Operation
1
Locking and unlocking the lid
IMPORTANT:
not lock the drawers. See step 2 for securing the drawers.
□ Insert the key (K) into the lock and turn one quarter turn
counterclockwise to lock.
□ Remove the key (K).
□ Insert the key (K) into the lock and turn one quarter turn
clockwise to unlock .
□ Remove the key (K).
K
3
Removing the drawers
□ Fully extend and empty the drawer.
□ Depending on the slide, either lift or lower the
release lever on both sides so the slides can ride over
the stops. Pull out to remove.
The key will only lock the top lid and does
2
Securing the drawers
IMPORTANT:
locking / unlocking the unit.
□ To lock the drawers: Move the locking lever down and pull on
the drawers to ensure all drawers are secured.
□ To unlock the drawers: Move the locking lever up and to the
right to secure the lever in the open position.
4
Installing the drawers
□ Pull the slides and slide carrier out until fully extended.
□ Hold the slide on the cabinet while aligning it with
the slide on the drawer.
□
Slightly insert one side and repeat for the other side.
□ Slowly push the drawer until it is fully closed to
engage the slide.
□ Open the drawer and close it to verify proper
operation.
8
The drawers must be fully closed before