Operation - Husky HOUC3101B12CA Guía De Uso Y Mantenimiento

Carro para herramientas de 1 cajón para mecánico de 78.7 cm
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Operation

1
Locking and unlocking the lid
IMPORTANT: The key will only lock the top lid and does
not lock the drawers. See step 2 for securing the drawers.
□ Insert the key (K) into the lock and turn one quarter turn
counterclockwise to lock.
□ Remove the key (K).
□ Insert the key (K) into the lock and turn one quarter turn
clockwise to unlock .
□ Remove the key (K).
K
3
Removing the drawers
□ Fully extend and empty the drawer.
□ Depending on the slide, either lift or lower the release
lever on both sides so the slides can ride over.
Pull out to remove .
2
Lifting/Lowering extendable side table
□ Lift the extendable side table to raise into position and push it
down. Make sure it is locked to the mechanism properly .
□ Lower the extendable side table when not in use. Pull it up first
and let it down slowly.
4
Installing the drawers
□ Pull the slides and slide carrier out until fully extended.
□ Hold the slide on the cabinet while aligning it with
the slide on the drawer.
Slightly insert one side and repeat for the other side.
□ Slowly push the drawer until it is fully closed to
engage the slide.
□ Open the drawer and close it to verify proper
operation.
8

Publicidad

Tabla de contenido
loading

Tabla de contenido