wolfcraft MASTER cut 2600 Traducción Del Manual De Instrucciones Original página 42

• If it is unavoidable to use a power tool in a wet environment, use a residual-current circuit breaker. It will reduce the risk
of electric shock.
Personal safety
• Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool if you are
tired or under the influence of drugs, alcohol or medication. A moment of inattention when using the power tool may result result
in serious injuries.
• Use personal protective equipment and always wear eye protection. Wearing protective equipment such as a dust mask,
non-skid safety shoes, hard hat or hearing protection as appropriate for the type of power tool and its application reduces the risk
of personal injuries.
• Prevent unintentional starting. Ensure that the power switch of the power tool is in the OFF position before connecting
to the power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch
or energising power tools that have the switch on invites accidents.
• Avoid working with an abnormal posture. Ensure that you have secure footing and proper balance at all times. This enables
you to better control the power tool in unexpected situations.
• Vermeiden Sie eine abnormale Körperhaltung. Sorgen Sie für einen sicheren Stand und halten Sie jederzeit das Gleichgewicht.
Dadurch können Sie das Elektrowerkzeug in unerwarteten Situationen besser kontrollieren.
• Wear appropriate clothing. Never wear loose clothing or jewellery. Keep hair and clothing away from moving parts. Loose
clothing, jewellery or long hair can get caught in moving parts.
• If the design of the power tool allows for the connection of dust extraction and collection equipment, these have to be
connected and properly used. Using dust extraction equipment can reduce hazards posed by dust.
• Even if you are very familiar with the power tool from frequent use, do not fall into the trap of a false sense of safety and
do not disobey the safety rules for using power tools. Careless action can cause severe injury within fractions of a second.
Power tool use and care
• Do not force the power tool. Use the correct power tool for your task. You will be able to do the work better and more safely
when using the correct power tool, in compliance with its rating.
• Do not use a power tool with a defective switch. A power tool that cannot be switched on or off is dangerous and has
to be repaired.
• Disconnect the plug from the electric socket and/or remove the battery, if detachable, from the power tool before adjusting
the tool, changing accessories or storing the power tool. This precautionary measure prevents the power tool from being started
accidentally.
• When not in use, store power tools out of reach of children. Do not allow persons who are unfamiliar with the power tool or
these instructions to use the power tool. Power tools are dangerous if used by inexperienced persons.
• Maintain power tools and accessories with great care. Check that moving parts are working properly and no binding occurs;
check for parts that are broken or damaged such that the function of the power tool is affected. Have damaged parts repaired
before using the power tool. Many accidents are the result of poorly maintained power tools.
• Keep cutting tools sharp and clean. Diligently maintained cutting tools with sharp cutting edges are less likely to bind and easier
to control.
• Use power tools, accessories, attachments etc. in accordance with these instructions. Take the work conditions and the task
to be performed into account. Using power tools for applications other than the intended use can result in hazardous situations.
• Keep handles and grasping surfaces dry, clean and free of oil and grease. When handles and grasping surfaces are slippery,
it is not possible to ensure safe operation and control of the power tool in unexpected situations.
Service
• Have your power tool repaired only by qualified specialists, using only original replacement parts. This ensures the power tool
remains safe to use.
Product-specific safety information
• Correctly assemble and set up the machine table before installing the power tool. Correct assembly and setup is important to prevent
the table from collapsing.
• Fasten the power tool securely to the machine plate before using it. If the power tool slips on the machine plate, loss of control
can result.
• Place the machine table on a firm, level and horizontal surface. If the machine table can slip or wobble, the power tool or workpiece
cannot be controlled evenly and safely.
• Avoid overloading the machine table and never use it as a ladder or support. Placing excess weight on the machine table or standing
on it can cause the centre of gravity of the bench to shift upward, causing it to tip over.
• Do not use the tool on materials other than wood or easily machined plastics. Exception: With the jigsaw only, it is permitted to cut
easily machined metal (such as aluminium), provided that a suitable saw blade is used.
• Do not remove loose fragments, chips or similar materials from the area around the moving saw blade by hand.
• The machines used must comply with DIN EN 62841-1. Devices manufactured after 1995 must bear a CE mark.
• Do not use the saw "freehand" - in other words, do not guide the workpiece by hand only, but also use the parallel guide or angle
stop.
• Take care not to pinch your hands when folding up and unfolding the table or inserting the machine plate.
t
42