Intended Use; Improper Use; General Safety Information - wolfcraft MASTER cut 2600 Traducción Del Manual De Instrucciones Original

ASSEMBLY TOOLS
1 allen key: A/F 5
(included in scope of delivery)
1 allen key: A/F 8
(not included in scope of delivery)

INTENDED USE

The MASTER cut 2600 is a machine table and work station. It is suitable for:
• Mounting a circular hand saw with riving knife on the machine plate with a max. saw blade diameter of 200 mm and max. cutting
depth of 70 mm. Do not use saws with base plate dimensions greater than the maximum values indicated (Fig. 4.G). The appropriate
gap insert must be used. This makes it a stationary circular bench saw.
• Use as a circular bench saw for circular hand saws without a riving knife. Only in conjunction with separate riving knife accessory,
art. no. 6916000 with a max. saw blade diameter of 159 mm and min. cutting width of 2.4 mm.
• Use as a circular bench saw for circular hand saws without a riving knife. Only in conjunction with separate riving knife accessory,
art. no. 6917000 with a saw blade diameter of min. 160 mm to max. 200 mm, a min. cutting width of min. 2.4 mm and max. cutting
depth of 66 mm.
• Use as a jigsaw table. The gap insert for jigsaws and routers must be used. Suitable for jigsaws with max. base plate dimensions
of 90 x 200 mm.
• Mounting a mitre saw. The mitre saw must be securely mounted in the designated slots with the fastening materials supplied.
• Use as a router table only in conjunction with the parallel milling guide, art. no. 6901000 and for routers with 230 V and
max. 1800 W. Do not use router bits with a diameter exceeding 27 mm. The router and jigsaw gap insert with the spacer rings
must be used. Suitable for routers with a base plate diameter of max. 180 mm and a base plate height of max. 40 mm.
• Use as a workbench for machining workpieces (e.g. drilling, sanding, etc.). • Workpieces can be clamped securely to the worktop
using the clamping accessories available in the wolfcraft range.
• Observe the manufacturer's safety instructions for the machines used, as well as the safety instructions for the machine table.
• When disposing of the MASTER cut 2600, please observe local disposal regulations.

IMPROPER USE

• Installing electronic devices other than circular hand saws, jigsaws and routers (e.g. no angle grinders, no plunge saws,
no reciprocating saws, etc.)
• Do not use battery-operated machines
• Do not saw round workpieces and firewood, as the rotating saw blade can turn them
• Do not make non-through cuts.
• Do not use as machine base for any machines other than mitre saws
• Do not use machines with dimensions that exceed the specified maximum base plate dimensions
The user is liable for any damage or accidents resulting from improper use.

GENERAL SAFETY INFORMATION

Workplace safety
• Keep your work area clean and well lit. Untidy or dark work areas can lead to accidents.
• Do not use power tools in explosive atmospheres that contain flammable liquids, gases or dusts. Power tools generate sparks
that can ignite dust or vapours.
• Keep children and other persons at a safe distance when using the power tool. If you are distracted, you may lose control
of the power tool.
Electrical safety
• The plug of the power tool must fit into the socket. The plug must not be tampered with in any way. Do not use adapter plugs
together with earthed power tools. Unmodified plugs and matching sockets reduce the risk of electric shock.
• Avoid making physical contact with earthed surfaces such as pipes, heaters, cookers and refrigerators. There is increased risk
of electric shock when your body is earthed.
• Keep power tools out of the rain and away from wetness. Water penetrating into a power tool increases the risk of electric shock.
• Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil,
sharp edges and moving parts. Damaged or entangled cords increase the risk of electric shock.
• When working with a power tool outside, use only extension cords that are suitable for outdoor use. Using an extension cord
that is suitable for outdoor use reduces the risk of electric shock.
t
1 hexagon wrench: SW 10
(not included in scope of delivery)
1 screwdriver: PH 1
(not included in scope of delivery)
41