C-Pen 20 Guía De Bolsillo página 17

How to Read with Your C-Pen 20
1. Place the cursor at the position where the read text is to be inserted.
Remember that the window has to be active.
2. Place the tip of C-Pen 20 before the first character you want to read.
The two supporting legs should be positioned so that the centre of
the text line is in the centre of the opening. The leg with the trigger
should be below the text line and the other leg above the text line.
C-Pen starts to read when the automatic trigger is pressed onto the
surface and will continue to read until the automatic trigger is
released.
3. Move C-Pen over the line of text. You can move C-Pen either left-
to-right or right-to-left over the text.
4. Lift C-Pen after the last character you want to read. C-Pen stops
reading when the automatic trigger is released.
5. Continue in the same way for the next line.
EN EN EN