Publicidad
Step 19
• Loosely attach the wall mounting brackets (H19) to the middle shelf (D) using the wall mounting
bracket screw (H20).
x 1
H 1
x 2
H 19
x 2
H 20
Step 20
WARNING: BEFORE CUTTING OR DRILLING INTO ANY WALL SURFACE, VERIFY THE LOCATION OF ELECTRICAL,
PLUMBING AND GAS LINES. CUTTING ANY OF THESE MAY CAUSE SERIOUS INJURY.
• It is imperative that the unit be fastened to the wall for safety and stability.
• For safety reasons, it is imperative to use a stepladder.
• Place the assembly in the desired location and mark the location on wall through the holes in the wall
mounting brackets (H19).
• Drill holes in the marked spots on the wall. NOTE: If screws will not be going directly into studs, insert
wall anchors (H22).
• Complete mounting by tightening wall mounting screws (H21) into stud or wall anchors (H22).
• Insert adjustable shelves (M) in the desired locations, using the shelf clips (H18).
x 1
H 1
x 16
H 18
x 2
H 21
x 2
H 22
RECOMMEND
16
K
H 21
H 22
H 19
D
H 20
F
www.zennahome.com
IS08895-I
Publicidad
