Assembly And Installation - BH SHIATSU M1200 Instrucciones De Montaje Y Utilización

Assembly and installation

• Unpack the chair and footrest separately, this will require a minimum of four people. Check
the parts list to make sure nothing is missing.
Bag 1.-
Fig.a.- Cotter pin.
Fig.b.- Arm motor fastening shaft.
► Step 1:
After having unpacked the chair,insert the plug (1) into
the mains socket (220v), Fig.2.
Set the ON/OFF switch to position (1).
Press the start button on the remote control unit.
Press the raise backrest button and bring the backrest
up to its maximum position.
► Step 2:
Take the screw (M) off the chair's seat cover, as shown in
Fig.3.
Fig.1
Bag 2.-
Fig.c.- Flat washer
Fig.d.- Legrest fastening shaft.
Fig.e.- Legrest joint fastening shaft.
Fig.f.- Split pin.
28
M1200
Fig.2
Fig.3