After Use - BH SHIATSU M1200 Instrucciones De Montaje Y Utilización

Using the head massager.-
1. Assembly and installation
Place the massager on the backrest. Connect the
quick-fit connecters C, D and E to those marked
with the corresponding letters, Fig.18.
2. Methods of use:
A. Find the best position for your massage.
B. Lie back and rest your head.
C. Press the massage button to start the massage.

After use

• Once you have finished your relaxing
massage, lower the legrest to the bottom
position, Fig.19 and raise the backrest to
its highest position, as shown in Fig.20.
After use.
• Press the ON/OFF
chair will switch off. The massage rollers
will return to their original position, set the
switch located below the chair to the "O"
position, Fig.21, and unplug the cable (1)
from the wall socket.
● After use, switch the chair off and unplug
it from the mains supply.
● Place the remote control unit in its
support.
● To protect children from accidents and injuries, always make sure that the chair has been
unplugged from the electrical mains socket.
● If the chair is not going to be used for prolonged periods, store it away.
key and the
40
Fig.18
Fig.19
Fig.21
M1200
Fig.20