nobo TCU 700 Instrucciones De Uso Y Montaje página 57

Configuring the receivers
1. Turn all heaters (receivers) OFF with the
switch on the heater.
2. Select 'RECEIVERS' in configuration
menu. Confirm that the existing receivers are
to be deleted by pressing 'SELECT'. TC700
will now start to search for receivers.
3. Turn the first receiver (heater) on. TCU700
will show that 01 receivers have been regis-
tered and the serial number will appear on the
display.
4. Turn on each receiver in turn as in Point 3,
until all receivers have been registered. The
TCU700 display will show the number of re-
ceivers found and the serial number of the last
registered receiver.
5. Press 'OK' to confirm the number of receiv-
ers and finish the search.
If the number of receivers needs to be changed,
a new search must be carried out and the cor-
rect number of receivers re-entered.
RECEIVERS: SEARCH
All registered receivers
will be deleted. OK?
RECEIVERS: SEARCH
xxx xxx xxx xxx

SELECT
Searching for
receiver
0
OK OK