nobo TCU 700 Instrucciones De Uso Y Montaje página 58

Configuration with Orion EC700
- central control unit.
1. On TCU700: Select 'SETTINGS' and 'SYS-
TEM'. TCU700 will now display its serial
number, which must be registered in EC700.
2. On EC700: Enter the TCU700 serial
number. (See separate EC700 instructions for
registration of receivers).
3. On EC700: Start configuration by going
to: 'SETTINGS > SYSTEM > RECEIVER
SETTINGS'. Select the correct zone and press
'SELECT' on the TCU700 serial number.
4. On TCU700: Go to the configuration menu
and select 'EC700' to start a search for EC700.
5. Press 'OK' on TCU700 and
when communication is established.
To deactivate the link with EC700, disconnect
the power to EC700. Then carry out a new
search for EC700 on TCU700.
on EC700
Configuration for EC700 requires version SW3.01 on
EC700 (Menu>Settings>System info). To update the unit,
contact Glen Dimplex Nordic AS

EC00: SEARCH
Searching for
EC00
EC00: SEARCH
Found EC00
xxx xxx xxx xxx
OK OK
T
w
T
o
m
m
T
f
E
w
T
ti
E
Y
th
E
h
tu
to
o
s