Functional Description; Overview; Start-Up; Setting Up - Deltafox DC-HPW 2115 Traducción Del Manual De Instrucciones Original

- Jet gun holder
- Quick-action
- water supply connector
- Jet gun
- Jet tube w/ high-pressure nozzle
- Jet tube w/ flat spray nozzle
- Nozzle cleaning pin
- Fork spanner
- Translation of the original
instructions for use

Functional description

The pressure cleaner cleans by means
of a water jet, with a choice of high or low
pressure operation.
A detergent can be added if this is re-
quired.
For the functions of the operating ele-
ments please refer to the subsequent
description. Ensure that the safety instruc-
tions are always observed!

Overview

A
1 Jet gun
2 Carrying handle
3 High-pressure fitting (gun)
4 Cable hook
5 Mains lead (not visible)
6 Jet gun holder
7 Wheels
8 Strainer frame
9 Water supply
10 On/Off switch
11 Accessories holder
12 Hose reel crank
13 High-pressure hose on reel
14 Quick-action
water supply connector
15 Cleaning agent tank
16 Opening of cleaning agent tank
17 Jet tube w/ high-pressure
nozzle
18 Jet tube w/ flat spray nozzle
19 Nozzle cleaning pin
20 Fork spanner

Start-up

In keeping with current regulations
a pressure cleaner must never
be operated off the drinking water
mains supply without a controlla-
ble backflow preventer. A suitable
backflow preventer in conformity
with EN 12729 type BA must be
used.
Water that has passed through a backflow
preventer is classified as undrinkable.
A backflow preventer is available in spe-
cialist shops.
• Employ an ordinary garden hose for
the water intake and ensure sufficient
length.
• Use the device on a domestic water
supply or a water source with a feed
rate of at least 450l/h.

Setting up

1. Fold the bow-type handle upwards un-
til it locks into place through a resist-
ance.
2. Fold the crank handle of the hose
drum outwards. It locks into place au-
dibly.
3. Slide the the jet gun holder (6) onto
the guide on the device housing.
4. Connect the high-pressure fitting (jet
gun) (3) to the jet gun (1). Use the fork
spanner from the package.
5. Connect the quick-action water supply
connector (14) to the unit's water sup-
ply port (9). Always use the filter insert
(8) and clean this as required.
GB
21