High-Pressure / Low-Pressure Operation; Interrupting Operation; Ending Operation - Deltafox DC-HPW 2115 Traducción Del Manual De Instrucciones Original

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 106
the quick connector for garden hose
adapter (14).
4. Fully open the water tap.
To vent the equipment:
5. Switch on the on/off switch (10) until
pressure has built up.
6. Switch off the on/off switch (10).
7. Press the on lever on the gun (1) until
the pressure has gone.
8. Please repeat process 5. to 7. a few
times until there is no more air in the
device.
High-pressure / low-pressure
operation
The jet tube with flat spray nozzle (18) is
designed for either high-pressure or low-
pressure operation.
The adjustable flat spray nozzle is set to
high pressure by default.
Push the tip of the nozzle forward to
change to low-pressure operation.
In this mode (low pressure), the unit will
automatically draw in cleaning agent from
the built-in tank.
Push in the tip of the nozzle to change to
high-pressure operation.
Lock / unlock the switch-on lever of
B
the gun (1) by depressing the lock-
ing button (21).
Lock the switch-on lever to pre-
vent the pressure washer from
being inadvertently / acciden-
tally started.
Locked
Open

Interrupting operation

Release the lever of the gun (1).
During prolonged work intervals turn
off the washer by its ON / OFF switch
(10).
If the equipment falls over,
switch off the equipment imme-
diately at the on/off switch (10)
and disconnect the equipment
from the mains at the mains
power cord (5). Risk of electric
shock! Only now should the
equipment be returned to an
upright position. For your own
safety, wait approx. 5 minutes
before reconnecting to the elec-
tricity.

Ending operation

1. After having worked with a detergent
rinse the washer with clear water.
2. Release the lever of the gun (1).
3. Turn off the pressure by its ON / OFF
switch (10). Disconnect the mains
plug.
4. Turn off the water tap.
5. Disconnect the pressure washer from
the water mains.
6. Pull the lever of the gun (1) to vent the
pressure existing within the system.
7. You can fold the bow-type handle
downwards in a place-saving manner
through a resistance.
8. The crank handle of the hose drum
can be folded after unlocking the slide
latch.
GB
23

Publicidad

Tabla de contenido
loading

Tabla de contenido