AVS Bugflector Instrucciones De Instalación

Bugflector
For proper installation and best possible fit, please read all instructions BEFORE you begin.
For technical assistance or to obtain missing parts, please call Customer Relations at 1-800-241-7219.
Important Safety Information
• CAUTION - Before driving, ensure that the hood shield is properly secured to vehicle.
• Do not use automatic "brush-style" car washes.
• Do not use cleaning solvents of any kind.
• Periodically check all components for tightness.
Contents
NOTE: Actual product may vary from illustration.
Hood shield
Tools Required
Preparation Before Painting / Installation
• A trial fit is recommended to ensure proper positioning and fit.
• Check fit of parts before painting as we will not accept the return of modified or painted parts.
• Wash and dry your vehicle to remove any debris and/or dirt from the installation area.
Installation Steps
rubber trim piece
(if equipped)
1
Installation Instructions
®
- Bugflector II
Car Wash Supplies
NOTE: Actual application may vary slightly from illustrations.
Open hood.
® ®
- Carflector - Chrome Hood Shield
Fastener x4 Machine Screw x2
( 98030 ) (04-4128)
Protective Film x2 Bump On x4
(45-3601) (98024)
Clean Towel Phillips
screwdriver
If equipped, remove and discard rubber trim piece from front
rubber trim piece
2
Page 1 of 3
I - Sheet Number BF103 Rev.A
™
Bracket x2 Black Plastic
(39-1956)
Washer x2
(37-4106)
Grease pencil
edge of hood.