Installing Or Removing The Blade; Cleaning - Panasonic ES-WR50 Instrucciones De Funcionamiento

3. Set the power switch to "0".
4. Attach the protective cap.
• To prevent deformation or damage of blade, or
attachment of foreign object, be sure to attach the
protective cap after using the appliance.

Installing or removing the blade

• Be sure to set the power switch to "0" when you
installing or removing the blade.
How to remove the blade How to attach the blade
1. Support the head of
the shaver with your
fingers so that it does
not swing excessively.
2. Slide the blade
release button in the
direction of the
arrows.
• It is easier to slide the
blade release button
with using your
fingernail.
PB017344 -ES-WR50 _(01GB)_04-22-19.indd 9
1. Support the head of
the shaver with your
fingers so that it does
not swing
excessively.
2. Insert the hook at the
end of the head into
the hole on the blade
to attach it.


3. Remove it toward the
direction indicated by
an arrow.
• You can remove it if
you float the resin
section by nails.

Cleaning

• This appliance cannot be washed with water.
Clean it up with the brush or dry cloth.
• Be sure to set the power switch to "0" before
cleaning.
1. Remove the blade and clean
it with the brush.
• It is not possible to
disassemble the blade.
2. Remove anything which
adheres to the blade with
a dry cloth.
3. Attach the blade.
(See this page)
3. Slide the blade
release button in the
direction of the arrow.
• It is easier to slide the
blade release button
with using your
fingernail.
9
2019/4/22 13:23:00