VIEWING STILL PICTURES
When the card is inserted, the images stored on the card are displayed. To
display the images stored in the internal memory, remove the card.
1
Press the power switch to turn the camera on, and press
.
• Playback mode is set.
• The green lamp on the camera lights.
• The monitor turns on and displays the last picture taken (single-frame
playback).
2
Use the arrow pad to playback other pictures.
Displays the previous
picture.
3
Press the power switch to turn the camera off.
• The monitor and camera turn off.
• The green lamp on the camera goes out.
PLAYBACK
Jumps to the picture 10 frames back.
Jumps to the picture 10 frames ahead.
Displays the next
picture.
En
En 31