DeWalt DW872 Traducido De Las Instrucciones Originales página 21

TOOTHED CHOPSAW
DW872
Congratulations!
You have chosen a D WALT tool. Years of experience, thorough
e
product development and innovation make D
most reliable partners for professional power tool users.
Technical Data
Voltage
UK & Ireland
Type
Power Input
No-load speed
Blade diameter
Blade bore
Blade body thickness
Blade kerf thickness
No. of blade teeth
Cross-cutting capacity at 90˚
circular
square
rectangular
angular
Cross-cutting capacity at 45˚
circular
square
rectangular
angular
Weight
Noise values and vibration values (triax vector sum) according to EN61029-1,
EN61029-2-9:
L (emission sound pressure level)
PA
L (sound power level)
WA
K (uncertainty for the given sound level)
Vibration emission value a =
h
Uncertainty K =
The vibration emission level given in this information sheet has
been measured in accordance with a standardised test given in
EN61029 and may be used to compare one tool with another. It
may be used for a preliminary assessment of exposure.

WARNING: The declared vibration emission level
represents the main applications of the tool. However if
WALT one of the
e
DW872
230
V
AC
V 230/115
AC
2
W 2200
min -1 1300
EC-Declaration of Conformity
mm 355
mm 25.4
Machinery Directive
mm 1.8
mm 2.2
70
Toothed Chopsaw
DW872
mm 130
D WALT declares that these products described under
e
mm 100 x 100
Technical Data are in compliance with:
mm 75 x 130
2006/42/EC, EN61029-1:2009+A11:2010.
mm 92 x 92
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact D
the following address or refer to the back of the manual.
mm 79
The undersigned is responsible for compilation of the technical
mm 79 x 79
file and makes this declaration on behalf of D
mm 79 x 123
mm 56 x 56
kg 22.5
Markus Rompel
Director Engineering
D WALT, Richard-Klinger-Straße 11,
e
dB(A) 95.0
D-65510, Idstein, Germany
dB(A) 108.0
29.03.18
dB(A) 3.0
m/s < 2.5
2
Definitions: Safety Guidelines
m/s 2 1.5
The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
these symbols.


the tool is used for different applications, with different
accessories or poorly maintained, the vibration emission
may differ. This may significantly increase the exposure
level over the total working period.
An estimation of the level of exposure to vibration should
also take into account the times when the tool is switched
off or when it is running but not actually doing the job.
This may significantly reduce the exposure level over the
total working period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool
and the accessories, keep the hands warm, organisation
of work patterns.
WARNING: To reduce the risk of injury, read the
instruction manual.
DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in death or
serious injury.
WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or
serious injury.
EngLIsh
WALT at
e
WALT.
e
19