König Electronic HAV-WKL12 Manual De Uso página 4

How to turn off the alarm
When the alarm goes off, press any key to switch off the alarm function and enter the snooze function.
The alarm will sound for 1 minute and the snooze function can be activated 3 times.
When the clock is in alarm time mode, press the " " key for 2 seconds to turn the alarm time on or off.
When the clock is in snooze mode, press the "Set" key for 2 seconds to turn the snooze time on or off.
Remarks
The display will return to normal time display by pressing the "MODE" button or by not pressing any
button after 30 seconds.
The alarm will not function if the alarm time is set within the wake up period.
How to set the sleep timer
To set the sleep timer, choose a sleep period (from 5, 15, 30 or 60 minutes) and the type of sound
(3 nature sounds or 1 alarm sound) you want to set. The sleep timer is set when the " " symbol is
visible on the display. The light intensity of the lamp gradually decreases until it fades and the alarm
sound gradually decreases until it becomes silent after the sleep time.
When the unit is in clock mode, hold the "MODE" key until the " " symbol is shown on the display.
Press the "SET" key to enter the sleep time from: 00:05→00:15→00:30→00:45→1:00→Music.
Press the "up" and "down" keys to adjust to your desired setting.
3 nature sounds and 1 alarm sound can be selected.
How to turn off the sleep timer
When the clock is in sleep timer mode, press the " " key for 2 seconds to turn the sleep timer on or off.
Remarks
The display will return to normal time display by pressing the "MODE" button or by not pressing any
button after 30 seconds.
The light brightness level and sound level for the sleep timer is the same as your previous pre-set level.
The sleep timer will not function when the sleep time is set within the wake up period.
If the light intensity or sound level is adjusted during the sleep time period, the light intensity or sound
level will remain the same as the level upon setting. The timer will keep counting down.
How to set the brightness of the LED digits
When the unit is in clock mode, hold the "MODE" key until the " " symbol is shown on the display.
Press the "SET" key to enter the setting mode.
You can set 4 levels (from 1 to 4) for the brightness of the LED display by pressing the "up" and "down"
keys to adjust to your desired setting.
Remarks
The display will return to normal time display by pressing the "MODE" button or by not pressing any
button after 30 seconds.
How to select the sleep sound
Press the " " key and the sleep sound is played. Press the " " key again to turn off the sleep sound,
and press it twice to change to the other sleep sound. 4 different sleep sounds are built into the mood
light (1=beep, 2=forest, 3=wide field and 4=ocean wave).
Press the " " key and then press the "up" and "down" keys to adjust the sound level from 00 to 20.
Press the "SET" key to enter the sleep sound mode, press the "up" and "down" keys to select the music
playing time from 1 to 60 minutes, and then press "SET" again to complete the setting.
How to connect your MP3, iPod or music device
Plug your MP3, iPod or music device into the audio in jack using the earphone cable (included). The
" " symbol is shown on the display.
Press the " " key to enter the music mode, and then press the "up" and "down" keys to adjust the
sound level from 00 to 20.
4