3. SERVICING
3.1. Changing the bag
1. Pull the drawer out of its housing using its handle.
2. Open the dustbag compartment lid to access the dustbag. Withdraw the bag in place, close it using the self-adhesive blanking plate provided for
this purpose and throw it away. Insert the new bag.
Caution: it is essential to install the dustbag properly and insert the motor filter when the unit is
operating. Without these precautions, dust may well enter the motor chamber and damage the
motor.
3.2. Changing the filter cartridge
Motor filter
3.3. Procedure for changing the filter
1. Press to remove the lid
2018-07_11070609-A_Notice_Installation_C_Integra.indd 19
Dustbag
2. Change the filter taking care to point the
back of the filter towards the rear of the
exhaust unit.
19
Bag holding clip
Bag tongue insertion
area
Carbon filter
Carbon filter bracket
Back section:
carbon filter
White front section:
HEPA filter.
EN
24/01/2019 18:10