7.
Connect ridge crown and two full rafters (FR) to two
4-way side tees to create center frame. Secure with
frame pins. (See Figure 12)
Figure 12
Ridge
Crown
Frame Pin
4-Way
Side Tee
8. Attach end bays to center frame with two ridge
poles (RG) and four eave poles (EV). Secure with
frame pins. (See Figure 13)
Figure 13
RG
EV
Center Frame
9. Loop end of each ratchet strap to fitting at each
leg location. (See Figure 14)
Figure 14
PAGE 4 OF 24
ASSEMBLY CONTINUED
FR
FR
Completed
Center Frame
EV
EV
RG
EV
Ratchet
Strap
10. Unroll the tent top. (See Figures 15-16)
NOTE: It is recommended to place tent top on a
drop cloth to protect from dirt and abrasions.
Figure 15
Drop Cloth
11. Pull tent top over frame, lifting up on fabric to create
air cushion under tent top. (See Figure 17)
Figure 17
12. Center tent top on frame by aligning the seams with
hip rafters (HR). (See Figure 18)
Figure 18
Figure 16
HR
0721 IH-9236