Power Supply - Hikmicro UD25400B Manual Del Usuario

responsibilities.
● Do not drop the product or subject it to physical shock. Keep the device
away from magnetic interference.

Power Supply

● The input voltage should meet the Limited Power Source (5 VDC, 2 A)
according to the IEC61010-1 standard. Please refer to technical
specifications for detailed information.
● Make sure the plug is properly connected to the power socket.
● DO NOT connect multiple devices to one power adapter, to avoid
over-heating or fire hazards caused by overload.
Battery
● Improper use or replacement of the battery may result in explosion
hazard. Replace with the same or equivalent type only. The battery type
is CR123A*2/RCR123A*2. Dispose of used batteries in conformance
with the instructions provided by the battery manufacturer.
● For long-term storage of the battery, make sure it is fully charged every
half year to ensure the battery quality. Otherwise, damage may occur.
● Do not charge other battery types with the supplied charger. Confirm
there is no flammable material within 2 m of the charger during
charging.
Maintenance
● If the product does not work properly, please contact your dealer or the
nearest service center. We shall not assume any responsibility for
problems caused by unauthorized repair or maintenance.
● Wipe the device gently with a clean cloth and a small quantity of
ethanol, if necessary.
● If the equipment is used in a manner not specified by the manufacturer,
the protection provided by the device may be impaired.
Using Environment
● Make sure the running environment meets the requirement of the
12