Legal Information - Hikmicro UD25400B Manual Del Usuario

 Select the correct battery voltage in the device menu, or it may cause
abnormal shutdown.
4. Install Rail (Page 3 – D)
Steps
1. Install the device to the rail as the black arrow shows.
2. Insert and tighten the screws.
3. Tighten the knobs to secure the device.
Note:
 Turn off the device first.
 Use the non-dust cloth to clean the device base and the rail.
5. Connect Device (Page 4 – E)
Steps
1. Turn on the device and make sure the hotspot function is disabled.
2. Lift the cover of data exchange interface.
3. Connect the device and power adapter with a type-C cable to power on
the device. Alternatively, connect the device and PC to export files.
User Manual

Legal Information

© 2021 Hangzhou Microimage Software Co., Ltd. All rights reserved.
About this Manual
The Manual includes instructions for using and managing the Product.
Pictures, charts, images and all other information hereinafter are for
description and explanation only. The information contained in the Manual
is subject to change, without notice, due to firmware updates or other
reasons. Please find the latest version of this Manual at the HIKMICRO
7