• If convert the voltage from 127V
60Hz to 220V60Hz:-
1.2.3. Steps 1 to 3 are the same
as above.
4. Connect the ""Wash 220V" of
the terminal connector with
"Wash", "Spin 220V" with "Spin"
to convert the voltage to
220V60Hz."
Maintenance
Attention to Maintenance
After using the washing machine,
wipe the moisture and stain on it
with a piece of soft cloth.To avoid
damage to the surface,do not use
corrosive or volatile chemicals.
42
5. The step 5 is the same as above.
In the step 4. above, should co-
nnect the terminal connectors of
both wash and spin, and make sure
to connect correctly.
*The factory-set voltage is
"220V60Hz". Users can chose the
voltage according to the regional
voltage range.
Cleaning the lint filter
1. Press the button head, and
pull the lint filter out.
2. Turn the filter net inside out, and
rinse it in water.
3. After inserting the claw, press the
button to insert it into place.
4. A sound of "ba" means proper
installation.
Button head
Claw