Dräger REGARD 3900 Serie Instrucciones De Uso página 63

Position of the jumper
1–8
Position of the jumper
9–16
Output modules
Place a jumper on the appropriate "Channels" terminals on the output module to
determine the channel outputs: 1–8 or 9–16. The same channels can be
determined for two or more output modules if necessary.
5.6.3 Connecting control modules and display PCB
24 V DC power supply for the input module
Connect all input modules to the DC voltage supply using the cable supplied.
Connect the first input module using the long cables (energy supply unit) and
connect all of the following input modules in parallel using the short cables (module
to module).
REGARD
Relay on the module
RL1
RL2
RL3
RL4
RL5
RL6
RL7
RL8
Relay on the module
RL1
RL2
RL3
RL4
RL5
RL6
RL7
RL8
®
3900
Installation & commissioning
Number in the system
1
2
3
4
5
6
7
8
Number in the system
9
10
11
12
13
14
15
16