bioSan Assist Serie Manual De Instrucciones página 12

I: O-ring
J: Seal
K: Calibration key
L: Filter
M: Ejector cap
N: Ejector pushbutton
P: Identification ring
can be ordered from your BIOSAN representative (type
of pipette and name of the part for this pipette should be
specified).
To find your nearest service center and for technical support,
visit http://www.biosan.lv
Warning: The replacement of the piston requires a cali-
bration procedure to be carried out, as described in
section 8.
22
All rights reserved. Product described in this manual is subject to avail-
ability and technical modification. Errors excepted.
BIOSAN reserves the right to improve, enhance or otherwise modify its
products without prior notification.
ENGLISH
23