Care And Cleaning - Hamilton Beach Professional 63245 Manual Del Usuario

How to Remove Meat and Food Grinder Accessory
1. Before removing Accessory, make sure Stand Mixer is unplugged
and Stand Mixer Speed Control Dial is set to OFF ( ).
Grinding Tips
• Cut meat into 1-inch (2.54 cm) thick strips. Place strips in freezer until very cold or use meat directly from refrigerator for easier grinding.
• Meat will extrude in long ribbons. If meat ribbons start to break during grinding, reduce grinding speed.
• Tough cuts of meat can be ground twice to tenderize. Do not process fatty cuts of meat twice.
• Natural casings need to be soaked in water to reduce salt before stuffing. Follow casing manufacturer's instructions.
• Do not grind bones or other hard items.

Care and Cleaning

1. Use a soft bristle brush to clean inside of Food Grinder
Accessory, Plates, and Grinding Auger.
2. Wash Grinder parts in hot, soapy water. Rinse and dry.
10
840336400 v22.indd 10
2. Turn Accessory Knob counterclockwise to loosen.
w CAUTION
Cut Hazard. The grinding blade and plate can be sharp. Handle with care.
3. Food Pusher with Lid, Stuffing Tube, Kibbeh Flange, Sausage
4. Wipe Stand Mixer with a clean, damp cloth.
Pull Accessory straight out. Disassemble to clean.
Extruder, and Kibbeh Extruder are dishwasher-safe in top rack
only.
4/14/20 5:55 PM