Hamilton Beach Professional 63245 Manual Del Usuario página 5

How to Assemble and Grind
w WARNING
Moving Parts Hazard.
To reduce the risk of personal
injury, always unplug mixer
before inserting or removing
accessories.
4. Insert Accessory straight into
Accessory Opening, aligning
tab on Accessory with Tab
Opening near Accessory
Knob. Turn Accessory Knob
clockwise to tighten and hold
Accessory in place.
840336400 v22.indd 5
1. Before inserting Accessory, make
sure Stand Mixer is unplugged
and Stand Mixer Speed Control
Dial is set to OFF ( ).
5. Slide Silicone Seal over
Auger Shaft, then slide
Grinding Auger into Food
Grinder with Auger Pin
facing out.
2. Lift up Accessory Cover and
let rest on Mixer Head.
6. Place Blade on Auger Pin,
aligning square side of Blade
with square on Auger Pin.
3. Turn Accessory Knob
counterclockwise until screw
cannot be seen in Accessory
Opening.
7. Place desired Plate on Auger
Pin, aligning notch on Plate
with notch on end of Grinder
Accessory.
4/14/20 5:54 PM
5