Charging Operation; Indicator Leds - Sennheiser L 1032 Modo De Empleo

CHARGING OPERATION

Insert the SKM 1030 or SKM 1032 hand transmitter with BA 1032 battery pack
inserted or BA 1032 battery pack into the L 1032 charger for charging. The
charging process then begins automatically. With BA 1032 battery pack, pay
attention to the direction of insertion (polarity and special contacts).

INDICATOR LEDS

Each charging port is controlled separately, whereby the associated LEDs (L) serve
to monitor the charging process.
Red LED is flickering:
Red LED is lit continuously:
Red LED is blinking brightly:
Green LED is lit:
Ready for operation! Please insert the
battery pack. (If the red LED continues
to flicker after the batteries are inserted,
the charging current circuit is not closed:
Battery pack defective).
Quick charge. Do not interrupt!
Defective battery pack!
(Short circuit in charging circuit!)
Quick charge is finished.The unit has
switched to trickle charge.
9