Product Safety Information; Product Specifications; Installation And Lubrication - Ingersoll Rand 2101XPA Especificaciones Del Producto

Product Safety Information

Intended Use:
These Impact Wrenches are designed to remove and install threaded fasteners.
For additional information refer to Product Safety Information Manual Form 04580916.
Manuals can be downloaded from ingersollrandproducts.com.

Product Specifications

Models Style
2101XPA Pistol
2101XPA-QC Pistol
2102XPA Pistol
Impacting Sound Level dB(A)
Models
† Pressure (L
2101XPA
84.8
2101XPA-QC
84.8
2102XPA
84.8
† K = 3dB measurement uncertainty
pA
‡ K = 3dB measurement uncertainty
wA
Sound and vibration values were measured in compliance with internationally recognized
test standards. The exposure to the user in a specific tool application may vary from these
results. Therefore, on site measurements should be used to determine the hazard level in
that specific application.

Installation and Lubrication

Size air supply line to ensure tool's maximum operating pressure (PMAX) at tool inlet. Drain
condensate from valve(s) at low point(s) of piping, air filter and compressor tank daily. Install a
properly sized Safety Air Fuse upstream of hose and use an anti-whip device across any hose
coupling without internal shut-off, to prevent hose whipping if a hose fails or coupling
disconnects. See drawing 47132790 and table on page 2. Maintenance frequency is shown in a
circular arrow and defined as h=hours, d=days, and m=months of actual use. Items identified as:
1. Air filter
2. Regulator
3. Lubricator
4. Emergency shut-off valve
5. Hose diameter
47520869001_ed4
Drive
Type Size
Square 1/4"
Hex 1/4"
Square 3/8"
(ISO15744)
) ‡ Power (L ) † Pressure (L
p w
95.8
95.8
95.8
WARNING
Recommended Torque Range
Impacts
per min.
ft-lbs (Nm)
3650 50 (68) Max.
3650 50 (68) Max.
3650 50 (68) Max.
Free Speed Sound Level dB(A)
(ISO15744)
) ‡ Power (L
p
83.6
83.6
83.6
* K = Vibration measurement uncertainty
6. Thread size
7. Coupling
8. Safety Air Fuse
9. Oil
10. Grease - during assembly
Forward Reverse
ft-lbs (Nm)
55 (75) Max.
55 (75) Max.
55 (75) Max.
Vibration (m/s²)
(ISO28927)
) Level
w
94.6 3.0
94.6 3.0
94.6 3.0
EN
*K
1.0
1.0
1.0
EN-1