Publicidad
Idiomas disponibles
Idiomas disponibles
+
Shiatsu Massaging Cushion
Power Button
To turn on the massage
functions, first press the
POWER button. The L.E.D.
indicator will illuminate and
confirm your selection. To
turn off the massage
functions, simply press the
Shiatsu Massage
button again. The L.E.D.
indicator will blink while
Shiatsu is a deep kneading
the dual massage
circular massage
mechanism returns to its
Shiatsu Programs
lowest point and then it will
Choose from 3 preset
turn off.
programs where the Shiatsu
massage travels up and down
in a specific area of the back.
NOTE: The moving
To select a program, simply
dual massage
press the button and the L.E.D.
mechanism always
will illuminate. To deselect,
"parks" or finishes in
press the button again or press
its lowest position. It
another button.
will continue to this
Spot Shiatsu
position after the
While the unit is in Shiatsu
power has been turned
massage, press either button to
off. If the electrical
stop and focus the Shiatsu
supply is interrupted,
action in one place. Once the
when power is
unit is operating in Spot
restored, the
Shiatsu, you may adjust the
mechanism will "park"
mechanism position by
or move to its lowest
holding down either button
position.
until the desired position is
Power Adaptor
reached. The Up Arrow will
+
The Shiatsu
Massaging
move the mechanism upwards
Cushion is powered by a
and the Down Arrow will move
custom 120 volt AC
it down. Once you release the
adaptor, which is included
button, the mechanism will
with your unit.
stop in that place.
Moving Dual Massage Mechanism
6
Demo Button
For a brief demonstration of the features of the Shiatsu
Massaging Cushion, press the Demo button. The unit will
complete one cycle combining Shiatsu, rolling and vibration
massage. Once complete, the unit automatically turns off.
Rolling Massage
Rolling is like two hands or thumbs working up and down
along your spine
Rolling Programs
Choose from 3 preset programs where the Rolling massage
travels up and down in a specific area of the back. To select
a program, simply press the button and the LED will
illuminate. To deselect, press the button again or press
another button.
Width Adjustment
While the unit is in Rolling massage, press this button to
adjust the distance or width between the massage heads.
This adjustment changes the area that is massaged along
your spine. With each press, the massage heads will move
to the next available position.
Seat
To choose invigorating vibration seat massage, press this
button. Vibration will turn on in Low (L) intensity and the
corresponding L.E.D. will illuminate. To change the
intensity, continue to press the button and the unit will
cycle through Medium (M), High (H) and then Off.
NOTE: There is a 15-minute auto shut off
on the unit for your safety.
Removable Flap
+
Remove for a more
intense back massage.
Moving dual
massage
mechanism
vibration massage
7
Invigorating
Publicidad
