Speedlink XANTHOS Manual De Uso página 11

5. Insert the power cable (coming from the subwoofer) in a power
D
outlet.
GB
6. Position the two rear speakers as required, connect the supplied
F
power cable to the speakers and insert the cable in a power outlet.
E
7. Select a channel for the rear speakers (see section "Channel
I
selection").
8. Switch on the system with the power switch on the back of the
subwoofer.
9. Start your sound source and check that the system is working
properly.
Connecting to a sound card
Only for use with 5.1 audio sources!
For connection, use the 3 supplied 3.5 mm to 2x Cinch cables
(see fig. 1)
1. Connect the 3.5mm stereo jack to the outputs of your sound
card.
2. Connect the other end of these cables to the Cinch inputs on the
back of the centre speaker. Now follow steps 3–9 described in the
section "Connecting to a DVD player" (see fig. 2).
Note: Since each sound card is different, it is not possible to describe
how to connect to your sound card in detail. Should you have problems
connecting the 5.1 system to your sound card, refer to the instructions
for your sound card or contact the manufacturer for more detailed
information on connection.
11