Channel Selection - Speedlink XANTHOS Manual De Uso

Channel selection:

D
There are 8 different channels available for use with the radio spea-
GB
kers. If you experience noise interference on the radio link of the spea-
kers due to electronic equipment such as microwaves, mobile phones,
F
WLAN, etc., simply select a different channel (see fig. 3).
E
Important information: Note that the channel you choose on the
I
centre speaker must agree with that of the radio speakers!
The table below gives all possible channel settings and frequencies on
which the individual channels operate.
fig. 3
Example:
1. To use channel 4 (CH 4), for example, move switches 1 and 2 up-
wards (using a pointed object) and switch 3 downwards. The correct
switch position is given in the "Switch no." column.
2. Now make this channel setting on the radio speakers too.
Operation
Control panel on the front of the centre speaker
1.1 Power:
1.2 Mute:
1.3 Volume:
1.4 Subwoofer:
1.5 Centre:
1.6 Surround:
puts the speaker system in standby mode
mutes the volume
adjusts the overall volume
adjusts the bass level
adjusts the volume of the centre speaker
adjusts the volume of the rear speakers
13