Inserting The Batteries - Hultafors ELWX 60 Instrucciones De Uso

6. Inserting the batteries

Open the battery compartment (page 2, fig. A). Insert the batteries (as shown on page 2, fig. A)
and close the compartment.
Note: The life of the batteries can change depending on the working temperature.
If possible, use the type of batteries described in the operating instructions.
7. Operation
Before operating the device for the first time, check that the batteries are installed as shown in
fig. 6. Do not point the laser at other persons when switching on the device.
8. Testing the accuracy of the device
8.1. Vials
1. Make a marking (a, b) as shown in fig.: 1.1.
2. Turn the laser spirit level once around
its own axis (180°), check the position
of the bubble in the vial, fig. 1.2
If:
15