Troubleshooting - Kenwood KDC-201 Manual De Instrucciones

Ocultar thumbs Ver también para KDC-201:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

TROUBLESHOOTING

Symptom
Remedy
Sound cannot be heard.
• Adjust the volume to the optimum level.
• Check the cords and connections.
"PROTECT" appears and no
Check to be sure the terminals of the speaker wires are
operations can be done.
insulated properly, then reset the unit. If this does not solve the
problem, consult your nearest service center.
• Sound cannot be heard.
Clean the connectors. (➜ 2)
• The unit does not turn on.
• Information shown on the
display is incorrect.
The unit does not work at all.
Reset the unit. (➜ 3)
• Radio reception is poor.
• Connect the antenna firmly.
• Static noise while listening to
• Pull the antenna out all the way.
the radio.
"NA FILE" appears.
Make sure the disc contains supported audio files. (➜ 11)
"NO DISC" appears.
Insert a playable disc into the loading slot.
"TOC ERROR" appears.
Make sure the disc is clean and inserted properly.
"PLS EJECT" appears.
Reset the unit. If this does not solve the problem, consult your
nearest service center.
Press and hold 0 to forcibly eject the disc. Be careful not
Disc cannot be ejected.
to drop the disc when it is ejected. If this does not solve the
problem, reset the unit. (➜ 3)
"READ ERROR" appears.
Copy the files and folders onto the USB device again. If this does
not solve the problem, reset the USB device or use another USB
device.
"NO DEVICE" appears.
Connect a USB device, and change the source to USB again.
"COPY PRO" appears.
A copy‑protected file is played.
"NO MUSIC" appears.
Connect a USB device that contains playable audio files.
"NA DEVICE" appears.
Connect a supported USB device, and check the connections.
"USB ERROR" appears.
• Remove the USB device, turn the unit off, then turn it on again.
• Try to connect another USB device.
10
Symptom
Remedy
"iPod ERROR" appears.
• Reconnect the iPod.
• Reset the iPod.
Noise is generated.
Skip to another track or change the disc.
Tracks do not play back as you
Playback order is determined when files are recorded.
have intended them to play.
"READING" keeps flashing.
Do not use too many hierarchical levels or folders.
Elapsed playing time is not correct.
This is caused by how the tracks are recorded.
The number of songs contained in
Podcast files are not counted on this unit as this unit does
the "SONGS" category of this unit
not support the playback of podcast files.
is different from the iPod/iPhone.
Correct characters are not
This unit can only display uppercase letters, numbers, and a
displayed (e.g. album name).
limited number of symbols.

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Kdc-101

Tabla de contenido