Setting Unit - Sigma ONYX EASY Manual Del Usuario

3. Personal Zone:
ONYX EASY also gives you the opportunity
to set your own training zone. To do this you
change the upper and lower limits in the
"Settings//User//Train. Zone" menu option
using the navigation button -> CHANGE.
Note: Notes about making settings can be
found at the start of this chapter.
3.2 Setting
Unit
Please refer to Chapter 7.3 "Beep summary" for a summary of the acoustic signals.
You will find information on the setting principle at the start of this chapter.
The "setting unit" menu provides the language
(D ,GB/USA, F, ES, IT), date, clock (12/24 hr. mode)
and various volume settings. The different volume settings are:
Button tones:
Button tones give the user acoustic feedback
each time a button is pressed.
Zone Alarm:
On the zone alarm, an acoustic signal beeps when the user goes above or
below the limits of the training zone.
ENGLISH
PAGE 15