Robot Roomba j7+ Guia Del Propietario página 15

Replacing the Bag
1
Lift up on the canister lid to open.
EN
2
Pull up on the plastic card to remove the
bag from the canister.
Note: This will seal the
bag so dust and debris
cannot escape.
10 For more information, visit global.irobot.com
3
Discard the used bag.
4
Install a new bag, sliding the plastic
card into the guide rails.
5
Press down on the lid making
sure that it is completely
closed.
Note: To achieve optimal performance
with your robot and automatic dirt
disposal, clean and/or replace your
robot's filter as needed.
Cleaning the Visual Docking
Target and Charging Contacts
Inspect the visual
docking target and
charging contacts to
make sure that they
are clear of debris.
Wipe with a clean,
dry cloth.
Note: Do not spray
cleaning solution
directly onto
sensors or into
sensor openings.
Removing debris from
Blower Cover
Inspect blower
cover for any lint
or debris build-up,
and wipe with a
clean dry cloth to
remove.