300
Active
4094
Inactive
5. Valide la configuración del protocolo de descubrimiento de capa de enlace (LLDP)
show lldp neighbors
Loc PortID
-------------------------------------------------------------------------------
ethernet1/1/1
ethernet1/1/1
ethernet1/1/25
ethernet1/1/26
ethernet1/1/29
ethernet1/1/30
ethernet1/1/54
ethernet1/1/54
mgmt1/1/1
6. Valide domain_id de VLT
show vlt <domain_id>
Domain ID
Unit ID
Role
Version
Local System MAC address
Role priority
VLT MAC address
IP address
Delay-Restore timer
Peer-Routing
Peer-Routing-Timeout timer : 0 seconds
VLTi Link Status
port-channel1000
VLT Peer Unit ID
----------------------------------------------------------------------------------
1
7. Valide el enlace de respaldo de VLT
show vlt <domain_id> backup-link
VLT Backup Link
------------------------
Destination
Peer Heartbeat status
Heartbeat interval
Heartbeat timeout
8. Valide que no haya discrepancias con domain_id de VLT.
show vlt <domain_id> mismatch
VLT-MAC mismatch:
No mismatch
Peer-routing mismatch:
No mismatch
VLAN mismatch:
No mismatch
NAS_Network
Rem Host Name
Not Advertised
Dell EMC PowerStore
Switch2
Switch2
Uplink-01
Uplink-02
Not Advertised
Dell EMC PowerStore
MGMT-01
: 1
: 2
: primary
: 2.0
: e4:f0:04:76:dd:8e
: 1
: 00:00:00:00:00:01
: fda5:74c8:b79e:1::2
: 90 seconds
: Enabled
: up
System MAC Address
e4:f0:04:76:cd:8e
: 100.0.100.11
: Up
: 30
: 90
T Eth1/1/1,1/1/54
T Po1000
Rem Port Id
00:e0:ec:da:e4:f2
00:e0:ec:da:e4:e2
ethernet1/1/25
ethernet1/1/26
ethernet1/1/26
ethernet1/1/26
00:e0:ec:da:84:4f
00:e0:ec:da:84:3f
ethernet1/1/42
Status
IP Address
up
fda5:74c8:b79e:1::1
Validar la configuración de PowerSwitch con switches ToR
T Po10,Po20,Po30
Rem Chassis Id
00:e0:ec:da:e4:f2
cyc-coreos
e4:f0:04:76:cd:8e
e4:f0:04:76:cd:8e
68:4f:64:68:c7:1d
68:4f:64:58:9f:a5
00:e0:ec:da:84:4f
cyc-coreos
68:4f:64:68:c7:1d
Version
2.0
69