Klarstein GALINA AMERICANA Manual De Instrucciones página 21

How to remove and install the grease filters
Remove the grease filters by pressing the button on the handle of the filter and removing
the filter.
To reinstall the filters, follow the steps below:
1 Angle the filter and insert it into the slots on the back of the hood.
2 Press the button on the handle of the filter.
3 Release the handle once the filter is back in its original position.
4 Repeat this procedure for all filters.
Installing the activated carbon filter (optional)
Note: If an activated carbon filter is installed, the extraction capacity decreases
slightly.
1 Disconnect the device from the
power supply.
2 Press the filter lock and remove the
grease filter.
3 Turn the carbon filter clockwise on
both sides of the motor. Replace the
carbon filters firmly with the new
carbon filters.
4 Install the grease filter.
5 Connect the unit to the power
supply.
EN
21