GreenWorks 27062 Manual De Instrucciones página 12

ASSEMBLY
ASSEMBLING THE WHEELS
The wheels are used to control the depth of operation. To adjust the height of the cultivator.
1. Remove the battery from the unit.
2. Place cultivator in a stable position as shown in Fig. 5
3. Insert the wheel assembly (2) into the support rod (3). (Fig. 5)
4. Align wheel assembly hole to desired position. Slide bolt (5) through hole and attach
hitch pin (6) to bolt.
tilling is Position A and lowest
5. The highest
6. Wheels can be removed for greater tilling depth.
(3) SUPPORT ROD
(2) WHEEL ASSEMB
(See Figure. 5)
HITCH PIN
(5)BOLT
LY
, Position B.
BOLT
POSITION
(6) HITCH PIN
POSITION B - LOWEST
12
A - HIGHEST
Fig. 5