GreenWorks 27062 Manual De Instrucciones página 14

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

ASSEMBLY
TINES INSTALLED CORRECTLY
NOTE:
tine blades should point towards the ground (Fig. 7).
NOTE:
The tiller will not operate properly if the tines are not installed correctly. If there is a problem with the
cultivating operation of the tiller, check the tines for proper positioning.
NOTE:
The directional arrow that is displayed on each tine should point toward the front.
FLUTE
INSTALLING TWO TINES FOR TILLING A NARROW AREA
Place tine (A) onto the shaft, and place tine (D) onto the other side shaft. Insert the hitch pin into
the holes in order to secure the tines to the tine shaft. (Fig. 8)
FLUTE
D
C
D
(See Figure. 7)
GEAR BOX
B
HITCH PIN
14
FLUTE
HITCH PIN
A
(See Figure. 8)
Fig. 7
Fig. 8

Publicidad

Capítulos

Tabla de contenido

Solución de problemas

loading

Tabla de contenido