Bluetooth Function; Usb Input - Trevi XF 900 CD Manual Para El Uso

ENGLISH
3. After a few seconds the Display (10) shows the number of tracks (songs) present on the disc and playback
will start automatically;
/
4. Press (13)/(35) button to activate the pause; the time indication will start flashing;
/
5. Press (13)/(35) button again to release the pause and start normal playback;
6. Press the STOP button
JUMP TRACE AND QUICK SEARCH
1. Pressing the button
you go to the previous track;
2. By holding the button
passage;
3. Release the button to return to normal playback;
4. The LCD display (10) always shows which track you are listening to.
REPEAT
- In playback mode:
• Press PROG./P-MODE (7)/(31), the icon "
• Press PROG./P-MODE (7)/(31), "
in the selected folder (only for MP3 CDs containing folders).
• Press PROG./P-MODE (7)/(31), "
• Press PROG./P-MODE (7)/(31), "RAN" indication appears on the display to randomly play all the tracks.
• Press PROG./P-MODE (7)/(31), "INTRO" indication appears on the display to play the first 10sec. of each song.
PROGRAMMING
You can select the order in which the tracks are played.
1. Press the button
STOP (19)/(32)
2. Press the
PROG./P-MODE (7)/(31)
3. Select the track you want to play first with the buttons
4. Press PROG./P-MODE
5. Repeat steps 3 and 4 to store and play the songs you want; for audio CDs a maximum of 20 tracks can be
stored, while for MP3/USB CDs a maximum of 99 tracks can be stored;
/
6. Press (13)/(35) on the unit to start
7. Press two time the button
ALBUM FUNCTION
Note: function valid only for MP3 CDs containing folders
1. When listening to an Mp3 song and you want to change directory, press and hold the 10/FOLD +/- (16)/(28)
button to move to the next/previous folders;
2. Press the 10/FOLD + (16)/(28) button to move to the next 10th track. Press the 10/FOLD - (16)/(28) button to move
to the previous 10th track.

BLUETOOTH FUNCTION

1. Switch on the device and select the bluetooth function,
2. In Bluetooth mode, the PAIR LED (8) will flashing and the system will automatically go into "Research" mode;
3. Switch On the Bluetooth function on the external device to be paired and start the search for devices;
4. Once the search is complete, select the "XF 900 CD" devices;
5. Enter the password "0000" if requested;
6. Press (13) button on the unit or the button (35) on the remote control to start playback and use the
/
: 9
(15)/(34) or (3)/(30) buttons

USB INPUT

1. Switch On the
appliance;
2. Insert a USB memory in the socket (1) and select USB function; playback starts automatically;
3. To pause playback, press
time indication on the display will begin to flash;
(19)/(32) to definitively stop playback; the display (10) will show the total tracks
:
(15)/(34) while listening to it you go to the next track, while with key
: 9
(15)/(34) or
" appears on the display to play the same track continuously.
DIR" indication appears on the display to continuously play all the tracks
ALL" indication appears on the display to continuously play all the tracks.
to stop playback;
button, the message "P01" appears on the display;
(7)/(31) button on unit to confirm;
playback;
STOP (19)/(32)
for track selection.
/ (13) button on the unit or press
(3)/(30) while listening, you quickly search for a particular musical
:
(15)/(34) or
to cancel programming.
the display will show
14
9
9
(3)/(30) on the unit;
"BLUETOOTH";
(35) button on the remote control; the
XF 900 CD
number.
(3)/(30)