Terraillon THERMO FAST Manual De Instrucciones página 64

Guidance and manufacturer's declaration – electromagnetic immunity
The thermometer are intended for use in the eIectromagnetic enviroment specified
below. The customer or the user of these thermometer should assure that it is used
in such environment.
Immunity test
Electrostatic
discharge (ESD)
IEC 61000-4-2
Electrical fast
transient/burst
IEC 61000-4-4
Surge IEC
61000-4-5
Voltage dips, short
interruptions and
voltage variations
on power supply
IEC 61000-4-11
Power frequency
(50/60 Hz)
magnetic field
IEC 61000-4-8
64
IEC 60601 Compliance
Test level level
±6 kV ±6 kV
contact ±8 contact ±8
kV air kV air
Not applicable Not applicable Not applicable
Not applicable Not applicable Not applicable
Not applicable Not applicable Not applicable
3 A/m 3 A/m
Electromagnetic
environment – guidance
Floor should be wood,
concrete, or ceramic tile.
If floors are covered with
synthetic material, the relative
humidity should be at least
30 %.
Power frequency magnetic
fields should be at levels
characteristic of a typical
location in a typical
commercial or hospital
environment.