Notes
Safety notes
General safety notes
Please observe the five safety rules:
1
2
3
4
5
®
Testboy
TV 292
WARNING
Sources of danger are mechanical parts, for example, which can cause serious
personal injury.
Objects are also at risk (e.g. damage to the instrument).
WARNING
An electric shock can result in death or serious personal injury, and also functional
damage to objects (e.g. damage to the instrument).
WARNING
Never point the laser beam/ LED beam towards the eyes directly or indirectly,
via reflective surfaces. Laser radiation can cause irreparable damage to the eyes.
WARNING
Unauthorised modification and/or changes to the instrument are not permitted, for
reasons of safety and approval (CE). In order to ensure safe and reliable operation
using the instrument, you must always observe the safety instructions, warnings and
the information contained in the section "Intended use".
WARNING
Please observe the following information before using the instrument:
Do not operate the instrument anywhere near electrical welders, induction heaters
|
or other electromagnetic fields.
After abrupt temperature fluctuations, the instrument must be allowed to adjust to
|
the new ambient temperature for approx. 30 minutes before using it, in order to
stabilise the IR sensor.
Do not expose the instrument to high temperatures for a long period of time.
|
Avoid dusty and humid environments.
|
|
Measuring instruments and their accessories are not toys, and must be kept out of
the reach of children!
In industrial facilities, the accident prevention regulations for electrical systems and
|
equipment, established by the employer's liability insurance association, must be
observed.
Disconnect
Ensure that the instrument cannot be switched back on again
Ensure isolation from the power supply (both poles deenergized)
Earth and short-circuit
Cover adjacent live parts
Notes
15