Information; Safety Information; General Safety Notes - Testboy TV 441 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 39

Information

Information

Safety information

General safety notes

Comply with the five safety rules:
1
2
3
4
5
16
WARNING
Sources of danger are, for example, mechanical parts, which may cause serious
personal injury.
Objects are also at risk (e.g. damage to the instrument).
WARNING
An electric shock can result in death or serious personal injury and endanger the
function of objects (e.g. damage to the instrument).
WARNING
Never point the laser beam towards the eyes directly or indirectly via reflective
surfaces. Laser radiation can cause irreparable damage to the eyes. The laser beam
must be deactivated when testing close to people.
WARNING
Unauthorised modification and / or changes to the instrument are not permitted, for
reasons of safety and approval (CE). In order to ensure safe and reliable operation
using the instrument, you must always comply with the safety instructions, warnings
and the information contained in the section "Intended use".
WARNING
Comply with the following specifications before using the instrument:
Do not operate the instrument anywhere near electric welders, induction heaters or
|
other electromagnetic fields.
|
The instrument must be allowed to adjust to the new ambient temperature for
approx. 30 minutes after abrupt temperature fluctuations and before use in order to
stabilise the IR sensor.
Do not expose the instrument to high temperatures for a long period of time.
|
Avoid dusty and humid environments.
|
Measuring instruments and their accessories are not toys, and must be kept out of
|
the reach of children!
|
When working in industrial facilities, comply at all times with the specifications of the
accident prevention regulations for electrical systems and equipment as established
by the employer's liability insurance association.
Disconnect
Ensure that the instrument cannot be switched back on again
Ensure isolation from the power supply (check that there is no voltage on both poles)
Earth and short-circuit
Cover adjacent live parts
®
Testboy
TV 441

Publicidad

Tabla de contenido
loading

Tabla de contenido