Time Mode; Alarm Mode - MOB MO9212 Manual Del Usuario

MO9212
EN
Heart rate monitor watch
Features
Wireless receiving heartbeat signal transmitted from the heartbeat brooch, chest band frequency is AM5.3KHz;
Time display: Hour, Minute, Second;
Alarm clock function;
Emits alarm when heart rate exceeds the upper and lower limit values (60~220).
Timing (maximum time-keeping is 23 hours, 59mimutes, 59 seconds, 99)
12/24 hour display format
EL backlight
Keystroke tone
Press key A in any mode, EL background will light for 3 seconds.

Time Mode

In normal time mode, press key B to enter alarm mode; press key D to enter heart monitoring mode; Press key D again to stop timing and
display average heart rate and the timed time 2 seconds each alternately. In timing stopped mode, press key D for 2 seconds to clear the
timed time and heart rate value, then it will return to normal time mode automatically.
Time Setting: In time mode, press and hold key C for 3 seconds to access to upper and lower limits setting of time and heart rate (heart
rate range is 60~220)
When numerical value flashes, press key D to adjust the flashing value;
In normal time setting mode, it will exit and return normal time mode automatically if no key operation within 60 seconds.

Alarm Mode

In alarm mode, press key D to enable/disable alarm and Hour Announcement symbol in turn.
" symbol
When the set time is reached, the alarm tone will stop automatically after ringing for 30 seconds or stop by pressing any key.
flashes when the alarm tone is heard.
Alarm Setting: In alarm mode, press key C once to enter alarm-setting mode. First, "Hour" flashes. Press key D to adjust the hour; then
press key C to flash "minute", and press key D to adjust the minute; finally, press key C to exit setting mode.
In alarm setting mode, it will exit and return normal time mode automatically if no key operation within 60 seconds.