Parts And Components; Before Use; Product Installation - cecotec GRANDHEAT 2000 FLATBED BLACK Manual De Instrucciones

ENGLISH

1. PARTS AND COMPONENTS

Fig. 1.
1. Control panel
2. View window
3. Door
4. Safety lock system
Control panel
Fig. 3.
1. Display
2. Microwave
3. Defrost
4. Stop/Cancel
5. Start

2. BEFORE USE

Take the product out of the box. If the microwave has a protective film, tear it off before
starting operation. Check carefully if there is any damage, and if there is, immediately notify
the Technical Support Service.
The product must be placed on a flat, stable and dry place and kept away from corrosive
materials, heat and humidity, such as gas burners or water.
The product must be placed in such way that the plug is accessible and must ensure an
effective grounding in case of leakage in order to avoid electric shocks.
The microwave door must be closed in order to operate.
In case there is any manufacturing rests in the microwave cavity or on the heating elements,
leave the microwave open to ensure good ventilation. In such case, it is recommended to heat
a glass of water at high power for several times.
Warning: Do not remove the light brown mica cover that is attached to the microwave cavity
to protect the magnetron.

3. PRODUCT INSTALLATION

Countertop installation
Place the appliance on a flat, stable surface.
Fig. 3.
The minimum installation height is 85 mm.
The rear surface of appliance shall be placed against a wall.
56 GRANDHEAT 2000 FLATBED BLACK/WHITE