Assembly - Hanging the Fan (continued)
5
Wiring the receiver to the
household wiring
WARNING: To avoid possible electrical shock, turn the
electricity off at the main fuse box before wiring. If you
feel you do not have enough electrical wiring knowledge or
experience, contact a licensed electrician.
WARNING: Each wire nut supplied with this fan is designed
to accept up to one 12-gauge house wire and two wires
from the fan. If you have larger than 12-gauge house wiring
or more than one house wire to connect to the fan wiring,
consult an electrician for the proper size wire nuts to use.
IMPORTANT: Use the wire connecting nuts (BB) supplied
with your fan. Secure the connectors with electrical tape and
ensure there are no loose strands or connections.
□
Spread the wires apart so that the green and white wires
are on one side of the outlet box and the black wire is on the
other side.
□
Connect the green fan wires to the household ground wire
(this may be a green or bare wire) using a wire connecting
nut (BB).
□
Connect the receiver (L) black or red wire to the household
black (hot) wire using a wire connecting nut (BB).
□
Connect the receiver (L) white wire to the household white
wire (neutral) using a wire connecting nut (BB).
□
Secure each wire connecting nut using electrical tape.
BB (x3)
Black
Black or Red
Receiver
Antenna
ON DIP
1 2 3 4
Receiver (L)
Outlet Box
Green (or Bare)
White
Green
6
Wiring the fan to the receiver
NOTE: The fan comes with 12 in. lead wires for use with the
provided 8 in. ball downrod assembly (B). If you wish to use
longer downrod, you can use the extension lead wire (66 in.) (N)
provided.
□
If using the 8 in. ball downrod assembly (B) provided, wire
the receiver to the fan wires by connecting the molded
adaptor plug from receiver (L) with molded adaptor of the
fan motor assembly (E) together.
□
If you wish to use longer downrod, you can use the
extension lead wire (66 in.) (N) provided by connecting the
molded adaptor together.
ON DIP
1 2 3 4
10
Outlet box
in the ceiling
Green
N