Safety Instructions; Important Safety Information - Flex ADM 60-T Instrucciones De Funcionamiento Originales

FLEX ADM 60–T
For your safety
Intended use
This measuring instrument is designed
for commercial use in industry and trade.
The laser range finder is designed for measu-
ring lengths, heights and distances as well as
for determining distances, areas and volumes.

Safety instructions

WARNING!
Read all safety instructions and other instruc-
tions to be able to work safely and securely
with the measuring instrument. Keep all safety
instructions and other instructions in a safe
place for the future.
– Do not point the laser beam at people or
animals and do not look into the laser beam.
This measuring instrument generates laser
radiation which may cause blindness.
– Have the measuring instrument repaired by
qualified technicians and with original spare
parts only. This ensures that the safety
of the measuring instrument is maintained.
– Do not let children use the measuring
instrument unsupervised.
They could accidentally blind people.
12
– Do not use the measuring instrument in
a potentially explosive environment which
contains flammable liquids, gases or dust.
The measuring instrument may generate
sparks which will ignite the dust or the
vapours.
– If devices other than the operating and
adjusting devices specified here are used
or if different procedures are implemented,
this may result in a hazardous exposure
to radiation.
– Do not disable any safety devices and
do not remove any information or warning
signs.
– Before switching on the device, check for
visible damage. Do not switch on damaged
devices.
– When using the measuring instrument on
ladders, avoid an abnormal body posture.
Ensure that you have a secure footing and
keep your balance at all times.
– If shipping the device or shutting it down
for a prolonged period, isolate the batteries
or take them out of the device.