Important Safety Information; Intended Use; Safety Instructions - Flex ADM 30 Instrucciones De Funcionamiento Originales

429.279_ADM30.book Seite 11 Freitag, 4. März 2016 8:03 08

Important safety information

Intended use

This measuring instrument is designed for
commercial use in industrial and trade
applications. The laser distance-measuring
device is designed for measuring lengths,
heights and gaps as well as determining surface
areas.

Safety instructions

WARNING!
Read all safety information and instructions to be
able to work safely and securely with the
measuring instrument. Keep all warnings and
instructions in a safe place for future reference.
Laser distance-measuring device
– Do not point the laser beam at people or
animals and do not stare into the laser beam.
This measuring tool generates a laser beam,
which can dazzle others.
– Have the measuring instrument repaired by
qualified technicians and with original spare
parts only. This ensures that the safety of the
measuring instrument is maintained.
– Do not let children use the measuring
instrument unsupervised. They could
accidentally blind people.
– Do not use the measuring instrument in a
potentially explosive environment which
contains flammable liquids, gases or dust.
The measuring instrument may generate
sparks which will ignite the dust or the
vapours.
– If devices other than the operating and
adjusting devices specified here are used
or if different procedures are implemented,
this may result in a hazardous exposure to
radiation.
– Do not disable any safety devices and do not
remove any information or warning signs.
– Before switching on the device, check for
visible damage. Do not switch on damaged
devices.
– When using the measuring instrument on
ladders, avoid an abnormal body posture.
Ensure that you have a secure footing and
keep your balance at all times.
USB charger
– Always check that the mains voltage matches
the voltage specified on the type plate of the
charger.
FLEX ADM30
11