Hardware Installation - Zyxel NWA1300-NJ Guia De Inicio Rapido

Hardware Installation

1. Slide the included
brackets to align with
screw holes on the top
and bottom of the
NWA1300-NJ. Use the
included M3 tapping
screws and washers to
secure the brackets to
the NWA1300-NJ.
There are three screw
holes on the bracket, which
allow you to adjust the
NWA1300-NJ's depth in the wall.
2. Slide the
NWA1300-NJ into
the wall faceplate.
Align the screw
holes on the
brackets with the
faceplate's screw
holes.
The distance between
the two screw holes of
the faceplate is 60 mm.
.
4
2
1